A high-performance
breathable brick stain

Our stain delivers the breathability & permanent color transformation you need to cost-effectively revamp your home.

CHEMICAL & MECHANICAL BOND

A brick stain that adheres in two ways for permanent results, every time.

Since the porosity of each brick can differ, we’ve formulated a stain that combines the adhesiveness of a paint with the permanent finish of a stain.

When latex paint is applied to brick, the film simply lays on top of the surface. This stops moisture inside of the brick from evaporating, leading to blistering & peeling. Our stain travels deep into the pores of your brick and through the chemical process of crystallization, it becomes part of the brick itself, allowing your brick to continuously breathe. For brick with decreased porosity, our stain also has the unique ability to grip to the top of the surface for optimal adhesion.

SILICATE MINERALS

Our brick stain let’s your brick breathe, 24/7.

The mineral-based chemistry of our stain is what makes it breathable. Humidity and vapour travel freely through the tiny spaces between the minerals to evaporate and escape the surface. As a result, our brick stain will never peel or blister like a latex paint.

WATER-REPELLANT

Stops water from invading your brick.

While large enough to allow moisture to pass through, the spaces between the silicate minerals in our brick stain are small enough to effectively block water from infiltrating the interior of your brick. This allows our stain to protect your brick from efflorescence and freeze-thaw damage. This stain does a whole lot more than just look good!

OPAQUE FINISH

Light to dark, dark to light. You can do it all with our brick stain.

If you’re worried that your dark red or brown brick will peek through a lighter colored stain, you don’t have to be! The beauty of our brick stain is that it literally dyes the masonry. The resulting opaque finish provides excellent hiding power and outstanding color coverage.

Our most popular brick stain color

When you want to make the move to grey, Windswept Smoke is a classic choice.

See All Colors
Windswept Smoke #5b5e55
Windswept Smoke
Siding Coating
Door & Window
Stucco Coating

Frequently asked questions about how it works.

Is Spray-Net the only one on the market who can paint on aluminum and vinyl siding, stucco and hardie-board, front and garage doors, windows, and brick?

Spray-Net isn’t the only company that paints aluminum and vinyl siding, stucco, hardie board, doors and windows, or brick. However, through years of research and rigorous testing and working with paint chemists, we have created custom formulations for each specific application. We can confidently offer a 15-year no-peel warranty on all of our applications with our custom coatings and patented process. Spray-Net is the only company delivering a factory durable finish on each of these surfaces, as it’s the only thing we do, all day, every day! 

Is there anything else that is unique to Spray-Net compared to your competitors?

Spray-Net offers the most customized paint job on the market. What that means for you is the most durable job for the price. This is made possible by combining a variety of our tools, processes, and proprietary product development. We even created a software called the Spray Network, used internally by all Spray-Netters. It takes into consideration the weather conditions, temperature, and humidity on the application day in order to customize the coating to ensure our factory finish and 15-year warranty against peeling. We also take into account where the coating will be applied on the home with regards to sun exposure and high-touch areas (such as doors) and adjust our coating formulation accordingly. We use non-organic pigments, which do not degrade and fade over time. This means that our colors stay brighter and last longer, even with direct UV expose.  

Our paints differ as well by application. For instance, our brick coating is a stain that penetrates the brick, allowing it to breathe and last longer than a typical paint, which sits on the surface and traps moisture and peels within a couple of years. Our stucco coating is 15-times thicker and has a rubberier feel to evenly coat the texture of the stucco. Our vinyl shield coating has been formulated to allow darker color applications and to not warp with heat and UV exposure over time. Our line of kitchen cabinet coatings is hard enough to resist scratches but soft enough for daily wear and tear to prevent chipping. Custom paint for smarter painting! 

What’s the finish of your exterior paint?

For aluminum and vinyl exterior siding, we strike the perfect balance between a matte and glossy finish to minimize the appearance of surface imperfections and to create a like-new washable finish. These types of custom finishes are not available with conventional paints limited to matte, satin, or semi-gloss. For doors and windows, we follow the same gloss standards as the door and window industry so that they look like they’ve just arrived from the factory!

Do you only apply your paint by spray?

Yes, this is our specialty. Spray-applied paint results in a permanent, streak-free finish that just can’t be achieved with the traditional brush and roller method. All of our proprietary paints and coatings have been formulated solely for spray application with our equipment. Together, they create the optimal finish to give your home that brand-new look.

What types of Exterior surfaces do you paint?

We paint: 

  • Aluminum, fiber cement, vinyl, and engineered wood sidings  
  • Brick  
  • Stucco  and  aggregate 
  • Front and garage doors 
  • Windows  
  • Soffits, fascias, and gutters  

 

These surfaces will be coated with paints customized according to the material and weather. The paints allow for durability,  washability, UV resistance, high-traffic scratch resistance, and flexibility.   

 

Why can’t you paint a surface that has already been repainted?

We offer homeowners a permanent factory finish that serves as an alternative to replacement. If we can’t fulfill this promise to you, then we simply don’t take on the project. Delivering on the Spray-Net promise is very important to us. In the case of brick, if pores are already saturated with a coating, it’s virtually impossible for the brick to absorb our stain. Like stripping wood, the time needed to strip paint off aluminum and vinyl siding is indeterminate. It can actually take DAYS to completely remove several coats of paint. If a project takes days, then it’s not likely to be cost-effective. 

“Just paint over it” you say? Well, if we paint over an existing coat of paint, the aggressive nature of our coatings to maximize adhesion might actually pull away at the less-resistant latex paint. If the original paint film comes off, then the outermost coat of paint (ours) would also come off with it.  

How many coats of paint do you apply?

Unlike the traditional brush and roller method, spray-applied painting is measured according to paint thickness rather than the number of coats. Depending on the specific exterior coating that we’re using, paint thickness can vary between 4 and 20 mils. A thicker paint film doesn’t automatically mean it will be more durable; it all depends on what we’re trying to achieve for a final product’s properties. 

You can be sure that our expert painting crews are equipped with the knowledge, products, and experience to produce a permanent factory finish… every time. 

What kind of products do you use?

We are an eco-friendly painting company that uses our own exclusive line of low VOC, water-based, and industrial-strength exterior paints and coatings. All of our products fall under all government VOC limits. Each of our exterior and kitchen paints and coatings are uniquely tailored for each surface and for a specific method of application, and they all contain a unique blend of additives and superior inorganic pigments that allow us to achieve the desired results per surface that we’re revamping! 

Since factory paint is “baked,” is your paint as scratch resistant?

When painting doors and windows for manufacturers, IR lamps are used to artificially accelerate the curing process. This specific technique is necessary since the demands of the commercial market require quick packaging and delivery of products. To bring the same one-day permanent factory results to the residential sector, we’ve formulated our exclusive paints and coatings so that they become dry to the touch within 15-30 minutes of application, depending on the weather. In a short time, the paint film achieves a factory OEM level of hardness. With the help of the sun’s natural UV rays, the paint fully cures and achieves maximum hardness and durability in the days that follow. The sun’s natural UV rays are just as effective as a forced factory cure. When needed in unideal weather conditions, however, we can produce a forced bake for front doors in our mobile spray booth, since this high-traffic surface requires a quicker full cure. Our industrial grade formulations coupled with an optimal application process is what allows our coatings to be as scratch and mar resistant as factory coatings.

Happy Customers

Discover the stories behind their transformations.

Read their reviews

Beautiful Transformations

Check out some of our favorite achievements.

See our transformations

Affordable Solutions

Get acquainted with our affordable paint services.

To learn more

Innovation

Discover the chemistry that hides behind our exclusive paint formulas.

To learn more