A resilient, factory-hard finish you can safely wash season after season.
The ability of a paint to adhere to a surface & fight the elements depends on how well its polymer chains are linked. When those chains are weak, the elements start to break down the paint film, causing paint failures like chalking and premature fading.
Our coating for siding is formulated with crosslinking technology, which boosts the entanglement of the polymer chains to create a tight microscopic bond. The result? A smooth, factory-hard finish that resists peeling, chalking, fading, abrasion & even washing with chemical detergents.
A finish with phenomenal hiding power that looks brand-new.
The gloss of our exterior paint for siding looks just like an original manufacturer’s finish. It strikes the perfect balance of aesthetics & practicality: just enough shine that makes your siding look brand-new while minimizing the appearance of surface imperfections. Just what your aged and weathered siding ordered!
A paint for siding with no fillers. Just protection.
Not only is our paint for aluminum, fiber cement and engineered wood thicker than conventional latex paint when wet, it also dries to a thicker dry film with no fillers. This means after the water in the paint has evaporated, only high-quality resins, additives and pigments are left behind to protect your siding. A more resilient paint film means increased protection against chalking for aluminum, efflorescence for fiber cement and blistering for engineered wood.
Powdered siding? Not a problem for our coating.
Before spraying on our paint for siding, we power wash the surface to remove built-up powder. If small traces of powder remain on the surface, built-in adhesion promoters go to work and fiercely grip onto the surface, resulting in a finish that won’t peel or chip.
Spray-Net’s high-performance line of exterior paints & stains
Spray-Net’s high-performance line of exterior paints & stains
Our coatings will give you the closest thing to brand-new siding, doors & windows from a paint lab.
Door & Window
Frequently asked questions about how it works.
Is Spray-Net the only one on the market who can paint on aluminum and vinyl siding, stucco and hardie-board, front and garage doors, windows, and brick?
Spray-Net isn’t the only company that paints aluminum and vinyl siding, stucco, hardie board, doors and windows, or brick. However, through years of research and rigorous testing and working with paint chemists, we have created custom formulations for each specific application. We can confidently offer a 15-year no-peel warranty on all of our applications with our custom coatings and patented process. Spray-Net is the only company delivering a factory durable finish on each of these surfaces, as it’s the only thing we do, all day, every day!
Is there anything else that is unique to Spray-Net compared to your competitors?
Spray-Net offers the most customized paint job on the market. What that means for you is the most durable job for the price. This is made possible by combining a variety of our tools, processes, and proprietary chemistry. We even created a software called the Spray Network, used internally by all Spray-Netters. It takes into consideration the weather conditions, temperature, and humidity on the application day in order to customize the coating to ensure our factory finish and 15-year warranty against peeling. We also take into account where the coating will be applied on the home with regards to sun exposure and high-touch areas (such as doors) and adjust our coating formulation accordingly. We use non-organic pigments, which do not degrade and fade over time. This means that our colours stay brighter and last longer, even with direct UV expose.
Our paints differ as well by application. For instance, our brick coating is a stain that penetrates the brick, allowing it to breathe and last longer than a typical paint, which sits on the surface and traps moisture and peels within a couple of years. Our stucco coating is 15-times thicker and has a rubberier feel to evenly coat the texture of the stucco. Our vinyl shield coating has been formulated to allow darker colour applications and to not warp with heat and UV exposure over time. Our line of kitchen cabinet coatings is hard enough to resist scratches but soft enough for daily wear and tear to prevent chipping. Custom chemistry for smarter painting!
What’s the finish of your exterior paint?
For aluminum and vinyl exterior siding, we strike the perfect balance between a matte and glossy finish to minimize the appearance of surface imperfections and to create a like-new washable finish. These types of custom finishes are not available with conventional paints limited to matte, satin, or semi-gloss. For doors and windows, we follow the same gloss standards as the door and window industry so that they look like they’ve just arrived from the factory!
Do you only apply your paint by spray?
Yes, this is our specialty. Spray-applied paint results in a permanent, streak-free finish that just can’t be achieved with the traditional brush and roller method. All of our proprietary paints and coatings have been formulated solely for spray application with our equipment. Together, they create the optimal finish to give your home that brand-new look.
What types of Exterior surfaces do you paint?
- Aluminum, fiber cement, vinyl, and engineered wood sidings
- Stucco and aggregate
- Front and garage doors
- Soffits, fascias, and gutters
These surfaces will be coated with paints customized according to the material and weather. The paints allow for durability, washability, UV resistance, high-traffic scratch resistance, and flexibility.
Why can’t you paint a surface that has already been repainted?
We offer homeowners a permanent factory finish that serves as an alternative to replacement. If we can’t fulfill this promise to you, then we simply don’t take on the project. Delivering on the Spray-Net promise is very important to us. In the case of brick, if pores are already saturated with a coating, it’s virtually impossible for the brick to absorb our stain. Like stripping wood, the time needed to strip paint off aluminum and vinyl siding is indeterminate. It can actually take DAYS to completely remove several coats of paint. If a project takes days, then it’s not likely to be cost-effective.
“Just paint over it” you say? Well, if we paint over an existing coat of paint, the aggressive nature of our coatings to maximize adhesion might actually pull away at the less-resistant latex paint. If the original paint film comes off, then the outermost coat of paint (ours) would also come off with it.
How many coats of paint do you apply?
Unlike the traditional brush and roller method, spray-applied painting is measured according to paint thickness rather than the number of coats. Depending on the specific exterior coating that we’re using, paint thickness can vary between 4 and 20 mils. A thicker paint film doesn’t automatically mean it will be more durable; it all depends on what we’re trying to achieve for a final product’s properties.
You can be sure that our expert painting crews are equipped with the knowledge, products, and experience to produce a permanent factory finish… every time.
What kind of products do you use?
We are an eco-friendly painting company that uses our own exclusive line of low VOC, water-based, and industrial-strength exterior paints and coatings. All of our products fall under all government VOC limits. Each of our exterior and kitchen paints and coatings are uniquely tailored for each surface and for a specific method of application, and they all contain a unique blend of additives and superior inorganic pigments that allow us to achieve the desired results per surface that we’re revamping!
Since factory paint is “baked,” is your paint as scratch resistant?
When painting doors and windows for manufacturers, IR lamps are used to artificially accelerate the curing process. This specific technique is necessary since the demands of the commercial market require quick packaging and delivery of products. To bring the same one-day permanent factory results to the residential sector, we’ve formulated our exclusive paints and coatings so that they become dry to the touch within 15-30 minutes of application, depending on the weather. In a short time, the paint film achieves a factory OEM level of hardness. With the help of the sun’s natural UV rays, the paint fully cures and achieves maximum hardness and durability in the days that follow. The sun’s natural UV rays are just as effective as a forced factory cure. When needed in unideal weather conditions, however, we can produce a forced bake for front doors in our mobile spray booth, since this high-traffic surface requires a quicker full cure. Our industrial grade formulations coupled with an optimal application process is what allows our coatings to be as scratch and mar resistant as factory coatings.
Need another reason to choose Spray-Net?
Make your choice!
Discover the stories behind their transformations.Read their reviews
Check out some of our favourite achievements.See our transformations
Get acquainted with our affordable paint services.To learn more
Discover the chemistry that hides behind our exclusive paint formulas.To learn more